QUBINO ZMNHXD1 USER MANUAL Pdf Download (2024)

Manuals
Brands
QUBINO Manuals
Measuring Instruments
ZMNHXD1
User manual

3-phase smart meter

Hide thumbs Also See for ZMNHXD1:

User manual (13 pages)

Table Of Contents 2

Quick Links

Download this manual

USER MANUAL EN.

QUBINO 3-PHASE SMART METER

The Qubino 3-Phase Smart Meter is an extremely versatile and powerful Z-Wave device for

measuring energy in a three-phase electrical power network of up to 3 x 65A.

Table ofContents

Advertisem*nt

Table of Contents

Related Manuals for QUBINO ZMNHXD1

Measuring Instruments QUBINO ZMNHXD1 User Manual
3-phase smart meter (13 pages)
Measuring Instruments Qubino SMART METER User Manual
Powerful z-wave device for measuringenergy in a single-phase electrical power network of up to 65a. (51 pages)

Measuring Instruments Qubino Smart Meter Manual
The innovative and smallest (2 pages)

Summary of Contents for QUBINO ZMNHXD1

Page 1 USER MANUAL EN. QUBINO 3-PHASE SMART METER The Qubino 3-Phase Smart Meter is an extremely versatile and powerful Z-Wave device for measuring energy in a three-phase electrical power network of up to 3 x 65A.
Page 2: Table Of Contents
Where To Buy ....................................6 1. Introduction ....................................7 2. Use Cases ...................................... 9 3. Qubino 3-Phase Smart Meter Advantages and Highlights ......................13 4. Package Contents ..................................18 5. Technical Terms for Switches ..............................19 6. Compatibility with Z-Wave Gateways (hubs) ..........................20 7.
Page 3: About Qubino
About Qubino Qubino is a family of innovative Z-Wave devices, many of them the smallest of their kind. Numerous breakthrough innovations, 100% quality control, and responsive customer service make Qubino the number one choice for making your life more comfortable.
Page 4 About Z-Wave: The Z-Wave protocol is an interoperable, wireless, RF-based communications technology designed specifically for control, monitoring, and status reading applications in residential and light commercial environments. Mature, proven, and broadly deployed (with over 50 million products sold worldwide), Z-Wave is by far the world market leader in wireless control, bringing affordable, reliable, and easy-to-use 'smart' products to millions of people in every aspect of daily life.
Page 5: Safety Information
Safety Information For Qubino, safety is first, so we have prepared lots of safety tips and information that can be found throughout this manual. To ensure your safety, please read this manual carefully before installing the device; follow the instructions exactly. The manufacturer (GOAP d.o.o. Nova Gorica) shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
Page 6: 3-Phase Smart Meter - Available Frequencies
3-Phase Smart Meter - Available Frequencies ORDERING CODE POWER SUPPLY FREQUENCY Z-WAVE FREQUENCY* (MODEL NUMBER) ZMNHXD1 50/60 Hz 868,4 MHz ZMNHXD2 50/60 Hz 921,4 MHz ZMNHXD3 50/60 Hz 908,4 MHz ZMNHXD4 50/60 Hz 869,0 MHz ZMNHXD5 50/60 Hz 916,0 MHz...
Page 7: Where To Buy
It is designed to be mounted on DIN rail. The Qubino 3-Phase Smart Meter device can operate across a wide temperature range, from a chilly -25˚C to a scorching 55˚C (-13F˚to a scorching 131˚F). Every device also acts as a repeater...
Page 8 ON/OFF* Repeater inclusion ✓ ✓ ✓ ✓ ✓ *with additional external contactors - IKA/BICOM. IKA and BICOM are sold separately - for more info, please see Qubino catalogue. Product ordering codes (model numbers): IKA232-20/230V: 030 046 833 000; BICOM432-40-WM1: 30.074.038...
Page 9: Use Cases
We have prepared a few of them for you so you can get an idea for your next smart home project. Of course, there are countless of other options for how to use Qubino 3-Phase Smart Meter to remotely control devices via your smartphone.
Page 10 (*with additional external contactors - IKA/BICOM. IKA and BICOM are sold separately - for more info, please see Qubino catalogue. Product ordering codes (model numbers): IKA232-20/230V: 030 046 833 000; BICOM432-40-WM1: 30.074.038) • Remotely control and measure 3- •...
Page 11 • Remotely control and measure 3- • Remotely measure power consumption phase power consumption of one of whole house and control one group electrical device (for example: accurate of electrical devices (for example: information of electrical car energy lights) – with IKA232-20/230V consumption) –...
Page 12 Z-Wave device. heating will automatically turn off after it And have other Z-Wave devices trigger your reaches the set power consumption value. Qubino 3-Phase Smart Meter. This function is independent of other scenes and gateway (hub) commands.
Page 13: Qubino 3-Phase Smart Meter Advantages And Highlights
3. Qubino 3-Phase Smart Meter Advantages and Highlights • The Qubino 3-Phase Smart Meter is the most accurate Z-Wave 3-Phase Smart Meter in the world. It is the only Z-Wave 3-Phase Smart Meter where the current is measured by passing through the device – not through clamps. Measuring the electric consumption with a smart meter using clamps, is not as accurate as it is, if the electricity passes through the device.
Page 14 • The Qubino 3-Phase Smart Meter allows the easiest and quickest installation possible. There is no simpler installation than DIN rail installation – and the Qubino 3-Phase Smart Meter is a DIN rail mounted device so the installation is really simple.
Page 15 • Qubino 3-Phase Smart Meter can measure: Voltage [V], Current [A], Power – Active [W], Power – Reactive [var], Power Factor – [PF], Energy – Active power accumulated Import [kWh], Energy – Active power accumulated Export[kWh], Energy – Apparent power accumulated [kVAh], Energy –...
Page 16 • By scanning the QR code on the back of your Qubino device, the serial and part numbers will be automatically copied on your mobile phone; they also provide direct access to Qubino’s technical support team. The serial and part numbers of your device are given...
Page 17 • The Qubino 3-Phase Smart Meter is certified by an independent European Institute and has CE, LVD and EMC certificates to ensure the highest safety standards. 3-PHASE SMART METER HIGHLIGHTS: • Use the optional contactor or bi-stable switch with the 3-Phase Smart Meter to facilitate the switching of power circuits or appliances •...
Page 18: Package Contents
4. Package Contents • 3-Phase Smart Meter Device • Installation Manual • S2 packaging label...
Page 19: Technical Terms For Switches
5. Technical Terms for Switches Symbol Switch example images Definition Qubino Other names Single pole, single throw Two-way (SPST) - One Switch; One-way switch Toggle switch Bi-stable switch (regular switch controlling one switch switch) light / circuit of lights Single pole,...
Page 20: Compatibility With Z-Wave Gateways (Hubs)
6. Compatibility with Z-Wave Gateways (hubs) Please check compatibility with your Z-Wave gateway (hub) before you purchase this device. The compatibility table is available online. https://qubino.com/products/3-phase-smart-meter/smart-meter-3phase-compatibility/...
Page 21: Installation
7. Installation Before installing the device, please read the following carefully and follow the instructions exactly: ⓘ Danger of electrocution! Installation of this device requires a great degree of skill and may be performed only by a licensed and qualified electrician. Please keep in mind that even when the device is turned off, voltage may still be present in the device’s terminals.
Page 22 The installation process, tested and approved by professional electricians, consists of the following simple steps: Step 1 – Turn OFF the fuse: • To prevent electrical shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance. •...
Page 23 Step 2 – Installing the device: • Connect the device exactly according to the diagrams shown below Before Qubino installation:...
Page 24 After the Qubino installation: For measuring the energy of the house:...
Page 25 For controlling one electrical device with BICOM432-40-WM1*: *BICOM is sold separately - for more info, please see Qubino catalogue. Product ordering code (model number): 30.074.038...
Page 26 For controlling one electrical device with IKA232-20/230V: *IKA is sold separately - for more info, please see Qubino catalogue. Product ordering code (model number): 030 046 833 000...
Page 27 For controlling electrical devices with IKA232-20/230V and one with BICOM432-40-WM1: *with additional external contactors - IKA/BICOM. IKA and BICOM are sold separately - for more info, please see Qubino catalogue. Product ordering codes (model numbers): IKA232-20/230V: 030 046 833 000; BICOM432-40-WM1: 30.074.038...
Page 28 ⓘ Note! The DSK code is used to include the device into the Z-Wave network. Once the device will be mounted, access to the DSK code label may be difficult, so we suggest rewriting the DSK code or scanning the QR code from the device label, before installing the device in electric box. Step 3 –...
Page 29 Step 4 – Add the device to your Z-Wave network: • For more details on how to include the device, please refer to the Z-Wave Inclusion chapter.
Page 30 Step 5 – The Installation is now complete. It’s time to make your life more comfortable with the help of the Qubino 3-Phase Smart Meter...
Page 31: Device Information And Support
By scanning the QR code on the back of your Qubino, its device title, serial number, and part number are automatically copied to your mobile phone. You can also use the code for direct access to the device page for more information.
Page 32: Electrical Diagram 3 X 230Vac
9. Electrical Diagram 3 X 230VAC Notes for diagram: L1I, L2I, L3I Live input Neutral input L1O,L2O, L3O Live output Neutral output Input for IR external relay/Ext. relay Output for External relay (max. 3W) Service button (used to add or remove device from the Z-Wave network) LED1 Device status.
Page 33 MEASUREMENTS: Voltage (U1, U2, U3) Current (I1, I2,I3) Power – Active (P1, P2, P3 and total P1+P2+P3) Power – Reactive total Power Factor Energy – Active power accumulated Import Energy – Active power accumulated Export kVAh Energy – Apparent power accumulated total kvarh Energy –...
Page 34 NOTE: there could be a meter measurement update delay for some scales up to 10 minutes. Therefore the first real measured values could be reported with the same delay. Watchdog To protect the Smart Meter against getting stuck in an undesired state, the watchdog timer is enabled.
Page 35 (IR) communication port on the side, second controlled by output on terminal * IKA and BICOM are sold separately - for more info, please see Qubino catalogue. Product ordering codes (model numbers): IKA232-20/230V: 030 046 833 000; BICOM432-40-WM1:...
Page 36 100. For more information, please consult the official manual, which can be obtained on the following address: http://qubino.com/download/1107/ IKA232-20/230V IKA232-20 is a bistable switch, which can be controlled, in contrast to the IR relay, using a digital output (on the 3-Phase Smart Meter). A bistable switch is a switching device with two stable states for switching on and off all kinds of electrical loads.
Page 37: Adding The Device To A Z-Wave Network (Inclusion)
10. Adding the device to a Z-Wave network (Inclusion) AUTOMATICALLY ADDING THE DEVICE TO A Z-WAVE NETWORK (AUTO INCLUSION) 1. Enable add/remove mode on your Z-Wave gateway (hub) 2. Automatic selection of secure/unsecure inclusion 3. The device can be automatically added to a Z-Wave network during the first 2 minutes 4.
Page 38: Removing The Device From A Z-Wave Network (Exclusion)
11. Removing the device from a Z-Wave network (Exclusion) REMOVAL FROM A ZWAVE NETWORK (Z-WAVE EXCLUSION) 1. Connect the device to the power supply 2. Make sure the device is within direct range of your Z-Wave gateway (hub) or use a hand- held Z-Wave remote to perform exclusion 3.
Page 39 LED SIGNALIZATION FOR INCLUSION/EXCLUSION LED1 (Green) • LED is ON = Power ON, module is included • LED is 1s OFF, 1s ON = Power ON, module is excluded LED2 (Yellow) a. External IR relay enabled only • LED is ON = External IR relay is turned ON •...
Page 40: Associations
12. Associations Use associations for direct communication between the 3-Phase Smart Meter and other devices within your Z-Wave network without the need of your primary gateway (hub). Association Groups: • Group 1: Lifeline group (reserved for communication with the gateway (hub)), 1 node allowed.
Page 41 Endpoint 3: Group ID Name Allowed Description nodes Lifeline Supports the following command classes: • Meter Report: triggered according Configuration parameters 40,42 and 43 • Switch Binary Report: triggered upon change of relay state [PG4] Endpoint 4: Group ID Name Allowed Description nodes...
Page 42: Configuration Parameters
13. Configuration Parameters Parameter no. 7 – Input switch function selection Available configuration parameters for input switch I1 Values (size is 1 byte dec): Default value 0 • 0 – disabled • 2 – IR external relay control – mono stable push button •...
Page 43 o To make the IR Relay (BICOM) responsive to the digital input, in addition to the setting of the configuration parameter 7, parameter 100 must also be set to value 1 or 2. Parameter no. 40 –Reporting on power change This parameter is valid for Active Power Total, Active Power Phase1, Active Power Phase2 and Active Power Phase3.
Page 44 Parameter no. 42 – Reporting on time interval This parameter is currently valid only for Active Energy Total Import/Export (kWh), Reactive Energy Total (kvarh), Total Energy (kVAh) • Available configuration parameters (data type is 2 Byte DEC) • Default value 600 (600 seconds - 10 minutes) •...
Page 45 Parameter no. 100 – Enable / Disable External IR relay (BICOM) Available configuration parameters (data type is 1 Byte DEC): • default value 0 • 0 – External IR relay disabled • 1 – External IR relay enabled and connected to all 3 Phases •...
Page 46 Parameter no. 106 – External IR relay (BICOM) power threshold settings – maximum power of all phases together This parameter defines a threshold when External IR relay is being turned off. (If Parameter no. 100 is set to the value 1 or 2) •...
Page 47 Parameter no. 112 – Power threshold – Delay before power on External IR relay/ External relay is turned off due to detected overload (as set by parameter 106&107) and remains off for a time, defined in this parameter. After that time, the output turns on to check, if the overload is still present.
Page 48: Technical Specifications
14. Technical Specifications Main terminals (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO) Contacts capacity: 2.5 ... 16 (25) mm2 Connection screws: Max torque: 3.5 Nm (PZ2) Optional terminals (1,2,4,5) Contact capacity: 1 ... 2.5 mm2 Screws: Max torque: 1.2 Nm Measuring input: Type (connection): three phase (4u)
Page 49 Reactive energy: Standard EN 62053-23: class 2 LED: Colour: Pulse rate: 1000 imp/kWh LED on: No load indication Optical communication: Type: IR - used to control BICOM432-40-IR Input (16): Rated voltage: 230 V (± 20%) Input resistance: 450 kOhm Safety: Indoor Meter: Degree of pollution: Protection class:...
Page 50 According standards for indoor active energy Meters. Temperature and climatic condition according to EN 62052 11 Dust/water protection: IP50 Operating temperature: -25 ... 55°C Storage temperature: -40 ... 70°C Enclosure material: self-extinguish complying UL94 V Indoor Meter: Degree of pollution: AC voltage test: 4 kV Standard:...
Page 51: Z-Wave Command Classes
15. Z-Wave Command Classes ROOT DEVICE DEVICE CLASS: GENERIC TYPE: GENERIC_TYPE_METER SPECIFIC TYPE: SPECIFIC_TYPE_WHOLE_HOME_METER_SIMPLE SUPPORTED Z-Wave COMMAND CLASSES: COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_TRANSPORT_SERVICE_V2 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_SECURITY_2_V1 COMMAND_CLASS_SUPERVISION COMMAND_CLASS_CRC_16_ENCAP COMMAND_CLASS_DEVICE_RESET_LOCALLY [S0]* [S2]* COMMAND_CLASS_POWERLEVEL [S0]* [S2]* COMMAND_CLASS_VERSION_V2 [S0]* [S2]* COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 [S0]* [S2]* COMMAND_CLASS_CONFIGURATION_V1 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]*...
Page 52 End Point 1 (Root copy, aggregated values) DEVICE CLASS: GENERIC TYPE: GENERIC_TYPE_METER SPECIFIC TYPE: SPECIFIC_TYPE_WHOLE_HOME_METER_SIMPLE SUPPORTED Z-Wave COMMAND CLASSES: COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_SECURITY_2_V1 COMMAND_CLASS_SUPERVISION_V1 COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]* COMMAND_CLASS_BASIC_V1 [S0]* [S2]* (not listed in NIF - only if one of the relays is enabled) COMMAND_CLASS_SWITCH_BINARY_V1 [S0]* [S2]* (only if one of the relays is enabled) End Point 2 (Phase 1) DEVICE CLASS:...
Page 53 COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]* End Point 3 (Phase 2) DEVICE CLASS: GENERIC TYPE: GENERIC_TYPE_METER SPECIFIC TYPE: SPECIFIC_TYPE_WHOLE_HOME_METER_SIMPLE SUPPORTED Z-Wave COMMAND CLASSES: COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_SECURITY_2_V1 COMMAND_CLASS_SUPERVISION_V1 COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]* End Point 4 (Phase 3) DEVICE CLASS:...
Page 54 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_SECURITY_2_V1 COMMAND_CLASS_SUPERVISION_V1 COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]* End Point 5 (External Relay) DEVICE CLASS: GENERIC TYPE: GENERIC_TYPE_METER SPECIFIC TYPE: SPECIFIC_TYPE_WHOLE_HOME_METER_SIMPLE SUPPORTED Z-Wave COMMAND CLASSES: COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_SECURITY_2_V1 COMMAND_CLASS_SUPERVISION_V1 COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]*...
Page 55 End Point 6 (External IR Relay) DEVICE CLASS: If External relay is not connected, this endpoint has a number 5 GENERIC TYPE: GENERIC_TYPE_METER SPECIFIC TYPE: SPECIFIC_TYPE_WHOLE_HOME_METER_SIMPLE SUPPORTED Z-Wave COMMAND CLASSES: COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_SECURITY_V1 COMMAND_CLASS_SECURITY_2_V1 COMMAND_CLASS_SUPERVISION_V1 COMMAND_CLASS_ASSOCIATION_V2 [S0]* [S2]* COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 [S0]* [S2]* COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2 [S0]* [S2]* COMMAND_CLASS_METER_V4 [S0]* [S2]* COMMAND_CLASS_BASIC_V1 [S0]* [S2]* (not listed in NIF - only if one of the relays is enabled)
Page 56 NOTE: * Command classes on endpoints are supported securely only if the device is added to a Z-Wave network as secure. NOTE: • Endpoints are shown/hidden by Parameter No. 100 • The relays will be turned ON or OFF after receiving the BASIC_SET command. •...
Page 57: Z-Wave Security
16. Z-Wave Security Qubino Smart Meter supports the latest Security 2 feature. Security S2 is handled by the Strong AES 128 Encryption protocol, which means that the S2 makes Z-Wave the most secure IoT (Internet of Things) security platform out there. In order to fully utilize the product and its SECURITY 2 feature, a Security Enabled Z-Wave gateway (hub) must be used.
Page 58: Important Disclaimer
Declaration of Conformity Qubino 3-Phase Smart Meter device is in compliance with the essential requirements and other relevant provisions of the Low voltage (LVD) Directive (2014/35/EU), Electromagnetic Compatibility (EMC) Directive (2014/30/EU), Radio Equipment Directive (2014/53/EU), Directive...
Page 59 Example: P/N: ZMNHXDx H1S1P2 GOAP d.o.o. Nova Gorica Ulica Klementa Juga 007, 5250 Solkan, Slovenia E-mail: info@qubino.com Tel: +386 5 335 95 00 Web: www.qubino.com Date: 19.04.2019; V 3.4 DON’T MISS OTHER INVENTIONS FROM QUBINO– CLICK HERE AND CHECK OUT QUBINO’S COMPLETE PORTFOLIO...

This manual is also suitable for:

Zmnhxd3Zmnhxd2Zmnhxd5Zmnhxd6Zmnhxd7Zmnhxd8 ... Show all

QUBINO ZMNHXD1 USER MANUAL Pdf Download (2024)

Quick Links

Related Manuals for QUBINO ZMNHXD1

Summary of Contents for QUBINO ZMNHXD1

Page 2: Table Of Contents

Page 3: About Qubino

Page 5: Safety Information

Page 6: 3-Phase Smart Meter - Available Frequencies

Page 7: Where To Buy

Page 9: Use Cases

Page 13: Qubino 3-Phase Smart Meter Advantages And Highlights

Page 18: Package Contents

Page 19: Technical Terms For Switches

Page 20: Compatibility With Z-Wave Gateways (Hubs)

Page 21: Installation

Page 31: Device Information And Support

Page 32: Electrical Diagram 3 X 230Vac

Page 37: Adding The Device To A Z-Wave Network (Inclusion)

Page 38: Removing The Device From A Z-Wave Network (Exclusion)

Page 40: Associations

Page 42: Configuration Parameters

Page 48: Technical Specifications

Page 51: Z-Wave Command Classes

Page 57: Z-Wave Security

Page 58: Important Disclaimer

This manual is also suitable for:

References